Home Management

Posts Tagged ‘home care’

Billowing festoon nets provide privacy but admit light, and give a softness of line which is perhaps particularly suited to bedrooms. In living rooms, a large floor length window may be necessary to do justice to the effect. It is best to look on them as a permanent feature – if you want something similar that can be lowered and raised, Austrian or festoon blinds might be more suitable. Festoon nets take a lot of fabric. You will need at least 1 ½ times the width and up to three times the height of the window. First, calculate the dimensions, take, for example, a 120cm wide window. It gives four 30cm festoons. To make up, festoons require casings, formed on the wrong side of the net, on which to draw up the fabric.

The points at which to make these casings should be 30, 60, and 90cm across the curtain after the fabric is drawn up to the finished width. Take account of the side hems in your calculations. If you need to join widths, make run and fell seams that coincide with the casings. Start by sewing the vertical casings into the length of the netting. Make two lines of stitching about 1.5 cm apart. Cut lengths of piping cord the length of the window. Thread the piping into the casings with a safety pin. Turn down and sew the top of the net to make the double heading which will be the casing for the wire, sewing across the piping cord as you go.

Pin up the bottom hem and sew it in place, again going across the piping to fix it. Adjust the fabric bunched up by the piping –you may find this easier if you lay the curtain out on the floor. At intervals of 10 or 12 cm down each vertical casing, pin the folds to the piping – the pinning the top casing, and try the curtain up against the window to see if the festoons are hanging neatly tain down and sew through each pinning point to anchor the festoons in place. Sew any fringes or tassels to the hem or the bottoms of the vertical casings, and the curtain is now ready to hang properly. It is also possible to buy a narrow lightweight nylon gathering tape, which you can simply sew on to the back of the curtain at the required intervals, then pull up the net to give the festoons.

Share this:

Dear readers!

In the modern trend, a house seems to be elegant when it have spacious and eye catching hall, modernized kitchen, neat dining area, beautiful flooring, well-designed wood works etc. Apart from this the most important place is bathroom. Everyone wants their dream house to be trendy and suit to their needs. To make a peaceful living space we are concentrating more on bathrooms. Even though we spent a lot in planning and constructing the bathrooms, in some cases due to some hasty plans it leads to dreadful results. In that case we go for bathroom renovations.

Before going for bathroom renovations various factors are taken into considerations like cost of renovation, time required, area of the bathroom, fittings, skilled lab ours etc. When the home owner is shortage of money, he/she should have knowledge about the renovation work. But collecting details about bathroom products and information is a time consuming task Instead of spending time in gathering all those necessary information , he/she just simply log onto various websites on the internet and make their work perfect. They provide guidelines and tips that can enlighten your plans for bathroom renovations.

In most cases bathroom renovations are needed either for damaged bathrooms or install new features as per the owner needs and rarely done for safety. But whatever the reason may be, the pipes must carefully inspect for leakages and old pipes must be replaced. Bathroom renovations for the sake of new features and good look are fine and even recommended, but the foremost important is to check the safety hazards.

If the home owner is willing to spend more money then he\she can hire the architects, and interior designers to design and construct the new area. But if the budget is short, they can do renovations by themselves with a little help and guidance from them.

By logging on to the renowned website they can make accurate estimation for renovating the bathroom and get their work perfect without sacrificing the quality.

Share this:

A pile of laundry, a library or a refrigerator to disorderly collapse. Which of these situations is troubling you most? That’s the first thing to do tomorrow (or, if you can today).

Shake off the work that disturbs me most is my new way to manage the chores. I decided to implement when, for various reasons, could not do my cleanup plan. My to-do list was so extensive that it did not start any of them or tried to perform them all at once.

Then I decided to try a new strategy … and has given me good results. I have no fixed days for washing floors or dusting the library. Now, every night I take a mental note of the chores that I do (cleaning windows, ironing, sorting, etc.). And I choose one to do tomorrow. What? The one that annoys me to have pending.

It’s that simple. Not always have a formal cleanup plan is the best option to keep a house clean and tidy.

Share this:

The basic fuse is a piece of wire between terminals on or in a ceramic block that can be pulled away from the fuse box. Fuse wire can be bought wound on a car, usually in 5 amp, 15 amp, and 30 amp sizes. Do not strain new wire between terminals. There should be some slackness. The ceramic part of their fuse may be marked with a figure to indicate the size wire to use, or it could be color coded: white for 5, blue for 15 and red for 30 amp.

A cartridge fuse is less troublesome to fit. It is a tube containing the wire, with metal ends to fit into spring clips. Each cartridge fuse is color coded; the most common are 3 amp, used for appliances up to 720 watts and 13 amp for those with a range of 720 to 3000 watts. A 13 amp plug can be fitted with a 3 amp or a 13 amp fuse. Lightly loaded equipment, such as radios and clocks, may have 3 amp fuses, but fires and other heavily loaded equipment require 13 amp fuses.

Some appliances, although they use below 720 watts, still need a 13 amp fuse because of the higher starting current required especially if they incorporate an electronic motor. A circuit breaker may look like a switch or have a projecting knob or button. If it becomes overloaded, the switch jumps to the off position or the button pops out. Both can be reset by removing them back.

Share this:

Take the looped paper to the wall. Use a small step ladder so you can reach the ceiling. Open out the looped top part and position the end against the ceiling, but with a little over for trimming. Hang one edge against the plumb line marks. Stroke the hanging brush down the center of the paper to force out air then brush to the edges. With the top in place, open the bottom fold and do the same to the bottom edge. The paper should lie as it comes, not be stretched in any direction, or there will be creases.

At top and bottom rub the back of the scissors in to the angle of the ceiling or skirting board to mark where the paper has to be trimmed. Peel the paper back and cut to these lines, then press it back. If there is excess past, use a sponge to remove it before pressing the paper back. Make sure the whole piece is tight against the wall by looking across it towards the light to see whether air bubbles are trapped. Slide the next piece of paper into position so the patterns match and the edge make a neat butt joint with the previous piece, then smooth it and trim top and bottom.

Share this:

Hi friends!

Everyone is possessive over their personal stuff. Some do not like others to step into their personal things so they have lockers to protect their personals from others. Likewise the fencing is done to protect your home and things from others. This also provides a boundary of the area which belongs to you alone. All you need to do is to construct a good fence that protects you. Now-a-days people prefer attractive fences which is not only for protection but also increases the beauty of their home.

There are many materials available to make a fence. Fencing may be done with wood, metal, iron, concrete, vinyl, PVC, brick or any other material. PVC is nothing but Poly Vinyl Chloride, which is preferred at present. About 30 percent of the people choose vinyl fencing. The vinyl fencing is easy to install and is also flexible. This best suits places which experiences windy climates. These have greater tensile strength, so they do not break like the other wooden fences.

If vinyl privacy fence is best suitable for your home. It makes you feel secured and content as you have installed the best for your home. The vinyl fencing is inexpensive when compared to the life time of a wooden or other type of fences. The initial cost may be a little high but these have long life. So install a vinyl fence for your home now

Share this:

Hi dear readers!

We all love to furnish our homes with various latest materials that can be used. Usually we can find all the shelves, table, mirrors, bed side tables, chest of drawers etc are made of wood. But now-a-days people tend to prefer white furniture. This is nothing but furniture made in white wood. This makes you feel a New England Lifestyle. The http://www.newenglandlifestyle.com helps you to get the best white furniture that you need.

The white furniture is made up of lime wood which is as same as maple. It is light in color as it has knots and resins present in it. They make the tongue and groove panels, back of the furniture and drawer bottoms are made up of MDF and the dining chairs are made of beech.

They provide their products only in white and oak colors. The shops are found mostly in UK and Europe. Do you the important factor about the New England Lifestyle furniture? All the furniture is hand made especially for you! Isn’t it great?

The white furniture is finished with spray painted with a brilliant white, water based paint and satin finish. The oak furniture is exclusively finished with a water based satin finish.

You can click here to have a look on the various products provided by them and buy them online. They provide safe online transactions. The products are delivered by six weeks from the date of booking. You can contact them at 0870 872 6292. You can also visit their new showroom, Unit 15 ford Lane Business Park, Ford Lane, Ford, NR Arundel, West Sussex BN18 0UZ which is open from 9.30am – 5pm on weekdays and 10am – 4pm on Saturday. You can mail them at orders@newenglandlifestyle.com.

Share this:

Soak any old wallpaper with warm water several times or use a stripping solution. Be careful not to dig the scraper into the plaster. If the old paper has a glazed surface, break through this with a wire brush, so that the water can penetrate. Plasterboard that has not been sealed will soften and become damaged with water. Always try a corner first. If the plasterboard under the paper softens, leave the paper on and put the new paper over it.

In a new house, plaster should be left at least six months before covering with paper. Glue size should be applied to an absorbent wall to prevent loss of adhesion by absorption of water from the paste. This is a thin wood glue to be painted on in the proportions stated on the packet – this is important. A painted wall should be sanded and sized before papering.

Fix lining paper horizontally with its edges butting. It may not be necessary to go all over a wall if it is generally smooth. Paper can be pasted over damaged and uneven surfaces only, but hard edges have to be avoided as they may show through the wall paper.

Paste lining paper over the affected area, allowing a small amount to be loose all round. When the paste has dried, tear this surplus away so as to leave a tapered, ragged edge. If there is still any hardness, sand so it blends into the wall.

Share this:

Hi pals!

The kitchen is a room or part of a room which is an essential part of our home. We usually furnish our home with the best stuff available. But do you know that furnishing a kitchen is also a must? You furnish it to get the facilities you want so that you can work at ease. If you need to remodel your kitchen, it is a must that you choose the best service which can get the work done in less time and less cost.

The kitchen refacing is the best option that you can choose in order to remodel the kitchen. At first you need to decide how your new kitchen should look. Then you need to remove the old cabinets, drawers, counter tops etc that are present. Then the new materials are arranged in proper places and fixed. This job can be done in a weeks’ time if you approach the best service who are experienced in this work. Else it will take more time to complete your work which may lead to a lag in your things to do list. The cabinet refacing is an important part in the remodeling of the kitchen. It must be made in order to make room for a larger refrigerator. Then you should cover all the open face frames. For this you can take the help of wooden materials. It increases aesthetic appearance and makes your kitchen look simple and the best. You can have all your required features such as tiles, faucets, sinks etc to be installed.

Thus you can get a new kitchen within less time without damaging much of your home. It is easy when it is in the right hands, so get the best firm for your kitchen refacing works.

Share this:

When dealing with panels in a door or elsewhere, paint the panels first. Get well into the surrounding angles, but be careful not to have too much paint on the brush, or it will build up in the angles or corners and may run. When dealing with windows, paint the bars and the moldings before the wider parts of the frame.

In other structures, it is normally best to deal with narrow parts before broad. If there are two colors to be used on one piece, it is lighter color first. If it runs over to where the darker color will come, the darker shade will hide the lighter one. Masking tape can be used to define the edge of the second color. With some paints that set very hard, leave the tape until the paint is almost dry then peel it off.

If you wait until the paint is very hard, you may finish with a cracked line. When using a roller for walls and ceilings, have enough paint in the tray and work the roller up and down the slope of the tray. A little experience will show how much paint to take up or work out to allow satisfactory use.

A roller covers large areas quickly, but is unsatisfactory where edges have to be defined. Use a brush around edges. When dealing with a wall or ceiling use the brush at the edges, doing small areas at a time ahead of the roller so that both coats are liquid when they meet.

If all the edges are done first with a brush, the paint may be dry before the roller reaches it and the meet may be obvious.

Share this: